:: 170W DC DC Converter - EN50155 :: HC170

A complete range of DC DC Converters designed to meet EN50155

A rugged epoxy filled case providing a high tolerance for shock and vibration.
Isolated Input to Output for ease of installation.
Wide DC Input voltages covering the most common nominal DC voltages.

110VDC also meets RIA12 385V, 20mSec surge no longer mentioned in EN50155.

Please contact sales if you do not see the Input/Output you require.

Suitable for many DC applications including mobile communications. 

 Click to Download Datasheet

:: 50 Watt Encapsulated DC DC :: SI50W1

A range of 50 Watt Encapsulated DC DC Converters PCB or Chassis Mounting with Fast on connectors

Designed In accordance with EN50155 - railway applications.
Wide Input Voltages:
Nom 12, 24, 48 & 110VDC

O/P Standard Options: 5,12,15 & 24VDC Other Voltages and higher powered units available. 100/150 & 200W series. 

 Click to Download Datasheet

:: 200W Encapsulated DC DC :: SI 200W1

200W Single Output Encapsulated DCDC Designed in accordance with EN50155 for Railway use

PCB or Chassis mounting with Fast on connections
Wide Input:
Nom 12,24,48 & 110VDC

Standard O/P VDC
5,12,15 & 24 Other Voltages available Upon Request.

Full series available with modules available in 50W, 100W, 150W & 200W 

 Click to Download Datasheet

:: 15 WATT MBR Series :: MBR15

Encapsulated Converters, full surge and protection to RIA12 and EN50155

Single, Dual and Triple Output versions
With Nominal Inputs from 24VDC to 110VDC
PCB PIN Mounting or Flying leads for bulk head mounting.

Input Ripple to RIA13 and EN50155 

 Click to Download Datasheet

:: 200W / 500W NS Series :: NS200 NH400

A range of Medium and High Power Converters that comply fully with the traditional RIA and latest EN standards

High Output Current Capability - now up to 500 Watts
Wide Choice of Input and Output VDC
Fully compliant with Rail Standards including EN50121.3.2
Fully enclosed in Rugged Splash Proof case 

 Click to Download Datasheet

:: 140 WATT EBR Series :: EBR1400

Fully enclosed single output unit which has been widely used to supply the power to train radios.

The EBR Meets traditional railway specifications.
The EBR has been adapted to now offer more Input VDC 24, 52, 72 and 110VDC

Nom 13.8VDC Output at 10Amps

Compliant with RIA12,13,18,20and EN50155 

 Click to Download Datasheet

:: 100W DC DC Din Rail PSU :: GWH100

din rail mounting DC/DC converters with a single isolated output

galvanically isolated DC power conversion up to 500W. Inputs vary from 24 to 110Vdc nominal, and outputs from 24 to 60Vdc.

A wide range of options exist for these converters including built in decoupling diodes, signal relays, wall / chassis mounting kits, and an option to be `Ruggedised` to enable the converters to meet the requirements of EN50155 and ENV50121 for on board rail applications.

 

 Click to Download Datasheet

:: 500 W DC-DC Converter :: GWH500

GWH Series Din Rail mounting DC/DC with a single isolated output

galvanically isolated DC power conversion up to 500W. Inputs vary from 24 to 110Vdc nominal, and outputs from 24 to 60Vdc.

A wide range of options exist for these converters including built in decoupling diodes, signal relays, wall / chassis mounting kits, and an option to be `Ruggedised` to enable the converters to meet the requirements of EN50155 and ENV50121 for on board rail applications
 

 Click to Download Datasheet

:: BR1875 :: 86/1910

Network Rail Product Acceptance No. PA05/2014. Fully compliant to the latest Network Rail`s specification.

Specially Designed for safety-critical applications.
Fully compliant to the applicable railway application EMC standard (BS EN50121-5)
Reverse Battery polarity protected (Alarmed)
Power Factor Correction
Dual Voltage (110V or 230V) auto-select
Power Off detection fitted as standard
High level of reliabilty ensured 

 Click to Download Datasheet

©Copyright 2006 PDS Design Solutions Limited. All Rights Reserved